E6
Midea E6 Error Code – Room/Evaporator Sensor Error
Air Conditioner · HIGH Severity
What This Error Means
Open or short circuit of room or evaporator temperature sensor
Diagnostic & Repair Steps
1
Power Reset
Turn off AC at breaker, wait 5 minutes, restart.
Turn off AC at breaker, wait 5 minutes, restart.
RESET
~5 min
2
Locate Room/Evaporator Sensor
Find the thermistor probe near the evaporator coil inside the indoor unit.
Find the thermistor probe near the evaporator coil inside the indoor unit.
INSPECT
~10 min
3
Check Sensor Connector
Disconnect and reconnect connector. Check for bent pins or corrosion.
Disconnect and reconnect connector. Check for bent pins or corrosion.
CHECK
~5 min
4
Measure Sensor Resistance
At 25C should read approximately 10k?. Replace if open or short circuit. ⚠️ Disconnect power before measuring
At 25C should read approximately 10k?. Replace if open or short circuit. ⚠️ Disconnect power before measuring
TEST
~15 min
5
Replace Sensor
Replace faulty NTC thermistor with correct Midea part.
Replace faulty NTC thermistor with correct Midea part.
REPLACE
~20 min
Need professional PCB repair in Colombo?
Midea E6 errors often require board-level repair. Bottrixx, a trusted electronics repair company in Colombo 02, diagnoses and repairs Air Conditioner PCBs with fast turnaround and same-day service available.
Related Midea Error Codes